The
AutoSpot is an instrument for distribution of activated amino acids derivatives to array positions on a reactive membrane. It has been mainly designed for peptide synthesis according to the SPOT method. Washing and deprotection steps are performed manually outside the instrument.
| Number of membranes: |
1 to 4 |
| Number of arrays: |
up to 8 |
| Number of spots: |
up to 800 per membrane |
| Typical loading: |
3-4 nmol/mm2 |
| Peptide length: |
ideally 10-12 residues, 30 max |
| Number of derivatives: |
up to 44 |
| Speed: |
up to 1 spot/second |
| Accuracy: |
0.5 mm |
| Volumes: |
50 nl to 10 µl |
| Software compatibility: |
Windows 3.11, 95, 98, NT |
| Power: |
220/240 V 50 Hz or 110/115 V 60 Hz, 150 Watt |
| Dimensions (w x d x h): |
52 x 63 x 48 cm, 21 x 25 x 19 inch |
| Weight: |
24 kg |
Parts
The list contains only parts most likely to be ordered without our assistance. Please contact us if you need anything else.
| Part no. |
Description: |
|
|
| 30.000 |
AutoSpot Robot complete |
|
|
| 30.010 |
AutoSpot upgrade kit |
|
|
|
General accessories and spare parts: |
| 30.040 |
transfer tube 550 µl |
| 30.050 |
0.5 ml syringe |
| 30.051 |
PTFE washer for 0.5 ml syringe |
| 30.060 |
AutoSpot needle, completely assembled |
| 30.062 |
AutoSpot needle, replacement |
| 30.064 |
replacement tips, pack of 5 |
| 30.066 |
spring locking ring for needle |
| 30.068 |
spring for AutoSpot needle |
| 30.100 |
derivatized cellulose membranes, pack of 4 |
| 30.120 |
membrane wash tray |
| 30.510 |
membrane holding frame, pack of 4 |
| 35.202 |
2 ml tubes, pack of 500 |
| 30.700 |
amino acid set, 20x1 cartridge of 0.5 mmol |
| 30.603 |
New graphical software (for Windows XP only) |
