Automated synthesis for the production of peptide arrays on coated microscope slides (
CelluSpots™ arrays).
| Number of Peptides |
simultaneous synthesis of up to 768 peptides on individual discs in two plates (384 peptides per plate) |
| Activation |
HOBt/DIC with preactivation or OPfp-ester |
| Pre-activation |
in dedicated vials possible with freely defined times |
| Amino Acid vials |
up to 48 derivatives can be accessed; small vials for expensive derivatives; separate mixer vials for pre-activation |
| Reagents |
up to 7 extra reagents accessible |
| Solvents |
up to 2 solvents accessible for washing |
| Peptide length |
ideally 10-20 residues, more possible |
| Cycle time |
approx. 2-4 hours, depending on protocol and total number of synthesis discs / peptides |
| Operation |
standard PC running Windows XP |
| Software |
Windows compatible software under XP |
| Power |
220-240 V or 90-120 V, 50-60 Hz |
| Dimensions ( w x d x h) |
57x50x69 cm (22.4x19.7x27.2 inches) |
| Weight |
62 kg |
PartsThe list contains the most frequently used parts. Please contact us if you need anything else.
|
Part no.
| Description: |
| 36.070 | Upgrade kit for CelluSpotsTM Synthesis
|
| | General accessories and spare parts: |
30.060
| AutoSpot needle, completely assembled
|
| 30.062 | AutoSpot needle, replacement
|
| 30.064 | replacement tip, pack of 5
|
30.066
| spring locking ring for needle
|
30.068
| spring for AutoSpot needle
|
| 30.120 | polypropylene membrane wash box
|
30.700
| amino acid set, 20x1 cartridge of 0.5 mmol
|
30.705
| 5 x amino acid set, 20x5 cartridges of 0.5 mmol
|
| 32.120 | 384 frame with 384 derivatized cellulose discs, pack of 2
|
32.121
| refill discs for two frames (2x 384 discs) |
32.436
| replacement PTFE foil
|
35.202
| 2 ml screw cap mixing vial, pack of 500
|
| 40.050 | 1 ml dilutor syringe |
32.040
| transfer tube 1100 µl
|
